200A MIG, TIG & MMA Inverter Welder

Fan cooled DC power supply for MIG and TIG, suitable to weld steel, stainless steel, copper, nickel, titanium and their alloys. Also suitable for MMA/ARC welding with a variety of rods including rutile, basic and stainless from Ø1.6mm to Ø4mm. Switch between MIG, TIG* and MMA* welding modes (*optional extra torches required). Automatic thermal overload protection. Self-explanatory pictogram for each dial and switch. Wire feed speed control. Allows change of polarity of welding torch depending on MIG or flux-cored welding. Supplied with 3m MIG torch, 3m 16mm� earth cable, both with 10-25 quick connectors., 3m gas hose and regulator. Contact Tips: 0.6, 0.8 (x2), 0.9, 1mm. 0.2kg 0.8mm flux cored wire.

• Fan cooled DC power supply for MIG and TIG, suitable to weld steel, stainless steel, copper, nickel, titanium and their alloys.
• Also suitable for MMA/ARC welding with a variety of rods including rutile, basic and stainless from Ø1.6mm to Ø4mm.
• Switch between MIG, TIG* and MMA* welding modes (*optional extra torches required).
• Automatic thermal overload protection.
• Self-explanatory pictogram for each dial and switch.
• Wire feed speed control.
• Allows change of polarity of welding torch depending on MIG or flux-cored welding.
• Supplied with 3m MIG torch, 3m 16mm� earth cable, both with 10-25 quick connectors, 3m gas hose and regulator.
• Contact Tips: 0.6, 0.8 (x2), 0.9, 1mm.
• 0.2kg 0.8mm flux cored wire.
• 3 Year guarantee*.
• Model No. INVMIG200